Sticker Application

Applying your new stickers or decals...

How to apply stickers/decals:

​

1. Using a flat item such as a card to transfer the sticker onto the sticky transfer tape. Press down gently and smooth the surface to ensure even adhesion.

​

2. Lift the corner of the transfer tape to ensue the sticker is attached.

​

3. Make sure the surface where the sticker is going to be applied is clean and dry.

​

4. Peel the sticker away from the backing sheet, making sure it is fully on the clear transfer tape.

​

5. Check and align the placement for the sticker. Then with your thumb smooth a line down the middle of the sticker to secure it to the item.

​

6. Working from the middle outward use a card or your thumb to adhere the sticker to the item. Make sure you press firmly enough that the sticker is fully adhered.

7. Check the sticker has transferred by lifting one corner of the transfer tape slowly, if the sticker has not transferred repeat step 5.

​

8. To remove the transfer tape pull slowly and evenly at a diagonal angle keeping the transfer tape as close to the items surface as possible.

​

9. You can reuse the transfer tape for other stickers, place it on the stickers backing sheet for future use.

​

10. Press down on the sticker to make sure there are no bubbles or lifted edges. If there are, use a card or your thumb to smooth these out.

​

Please cold/warm hand wash only! Although these stickers are waterproof, like anything they are a little sensitive to rough play...